Even Material is the Highest Goal of Magnetic Separation

Magnetic separator is becoming more and more popular in mineral processing, with the emergence of more magnetic separation equipment, the competitiveness between the manufacturers producing magnetic separation machine also become more and more sharp, Henan Bailing based on the actual needs of customers, makes special designation for magnetic separator system parts, to create a higher yield, economic and practical machinery with the same price. Our company thought from the final product of magnetic separation, how to make the magnetic separator select even materials, today we will take dry magnetic separator as an example to give customers a thorough explanation:

1. To adjust the interval between magnetic roller and plate

Plate and magnetic roller spacing is an important parameter of preconcentration technology, material partition interval is small, lean magnetite ore block are not better recovery, reducing the use of iron ore resources of rate; feed baffle spacing is greater, the gangue minerals are not better separation, grinding lower grade, not to carry forward the grinding power. According to ore properties and adjusting plate and roller spacing, the gangue is fully out, to ensure the full recovery of magnetic products, to ensure that the recovery rate of coal concentrate.

2. To adjust the plate height of dry magnetic separator

Separator material separator directly influences the separation effect of magnetic separator, the partition board is too low, the very lean magnetite ore block are not better recovery, reducing the use of iron ore resources; partition board is too high, the gangue minerals thrown incomplete, effect of dry magnetic separator identification function. According to the specific situation of dry plate to adjust the height, the dry separation can ensure certain tailings, and also can make the non-magnetic minerals better throw.

3. To add the feeder, try to make the dry material layer thin and uniform

In general, magnetic separator interval tube exterior more far, magnetic attenuation more fierce, material flow through the thick will form a non-magnetic particles and magnetic particles with each other, affecting the separation of ore, if can complete the particles on the belt is the most ideal monolayer dispersion. Requirements of dry before adding material layer feeder, useful as far as possible the use of belt width, the dry material layer is thin and uniform, to ensure that the dry separation effect.